Portable DC High Voltage Test Set is used for testing the underground cable for knowing the condition of cable-leakage at High Voltage. The units are supplied with 5 meter long input lead and 5 meter long output lead with sockets & clips. The unit comes with digital meters for easy readability with a test terminal for zero error.
- Available in 30, 60, 75 & 120 kV models
- Easy to operate
- Digital meters for easy readability.
- High Voltage Surge protection
- Multiplier circuit for better life.
Input: 220/230 Volts Single Phase 50Hz. Ac supply.
Cooling: Naturally Air Cooled. Output Voltage
Control: Stepless Rating : Continuous for testing duty.
HT Cable: The equipment is supplied with five meters long cooper braided H.T. cable with HT plug and socket. The braiding remains on earth potential.
LT Cable: For input supply ten meters long 3 core cable is provided.
Zero Start Interlocking: This is to ensure that the H.T. shall not actuate if the voltage control knob is not at zero position.
Earth Interlocking: If proper earth is not connected the HT shall not actuate.
Auto Discharging Arrangement: The equipment consists of automatic cable discharging arrangement.
Socket: H.T. plug and socket has been especially developed by us with automatic earthing arrangement
Meters: mA meter and Volt meter are provided on H.T. side. The meters are well protected against surges and spikes.
Over Voltage Protection: H.T. Automatically trips in case of output voltage exceeds the preset level.
Surges And Spikes Protection: During the testing surges or spikes are often generated due to short circuit. The equipment is fully protected against these.